Columbia Flexibility / Stiffness old method review

The Newton Ridge Plus II WP is worth your attention if:

• Gladly, the Midsole softness in cold II WP has a generously wide platform to keep the ride stable
• you are an entry-level or recreational hiker who doesn't need a very technical boot just yet
• Midsole width - heel

oz / 494g:

• Not much ankle support
• Toebox width - widest part
• downpours and harsh winter conditions

You will need more rugged and better-equipped footwear for the aforementioned use cases. That also means more expensive options like the How we test or the Difference in stiffness in cold.

According to Columbia's product specs, the Newton Ridge Plus II WP belongs to their "light cushioning" category which means that the midsole is minimally cushioned and feels close to the ground. That's why the boot is recommended for urban use and light hiking.

However, when we cut the boot in half and measured its stack height with a caliper, we found that it's not much thinner than the average hiking boot in our catalog.

At 33.7 mm, its heel stack is merely 2-3 mm lower than the category average and offers decent impact protection for several hours of walking and hiking.

Measuring the boot's forefoot stack, we also got a higher-than-expected reading of 23.9 mm.

Heel padding durability Fairbanks Mid (30.9 mm heel/ 19.4 mm forefoot).

We had to point that out because the brand's description may lead some people to think that the Newton Ridge is a minimalist type of boot.

But it does feel fairly grounded thanks to its firm midsole and a moderate heel-to-toe drop of 9.8 mm.

This offset creates a pretty balanced foot placement where the heel sits neither too high (which is common for backpacking boots) not too low to strain the Achilles tendon.

Just like many other boots from Columbia, the Newton Ridge Plus II employs the brand's most common Techlite foam. It feels like a regular EVA blend but it stands out as a notably lightweight material (more on that in the Weight section).

Measuring its softness with a Shore A durometer, we got a reading of 33.5 HA which is firmer than many other hiking boots we've tested, including other options from Columbia.

It makes the boot more stable and grounded but detracts from the comfort for all-day walks and hikes.

And if you intend to wear this Coumbia boot in low temperatures, be prepared for an even firmer ride.

Our lab tests showed that the Techlite foam lost 22% of its softness after spending 20 minutes in the freezer.

As a budget-friendly boot, the Newton Ridge uses a basic, moderately-padded foam insole. Measuring its thickness in the heel, our caliper showed 5.5 mm which is standard for a hiking boot.

The Midsole softness in cold II WP felt rather close-fitting in our regular size (men's US 9) and width (D medium). So once the boot's gel mold solidified, we grabbed a caliper to find out why.

The tool showed 92.6 mm in the widest part of the mold (the area between the first and fifth metatarsals) which is slightly narrower than average.

We believe that hikers with medium-width feet won't have any issues with this width but those with wider feet can benefit from the wide version of this boot.

We also measured the mold's width closer to the front (near the big toe) in order to compare its toebox shape to other hiking boots.

With a caliper reading of 69.8 mm, the Newton Ridge tunred out to have a more pointy type of forefoot which explains the snugness we expereinced during the wear test. However, it's not critically tight for a medium foot shape and is also optimal for hikers with narrower feet.

But if you have bunions or wide feet, do opt for the wide version for extra space. Don't rely on a break-in period to loosen up the fit because the boot's leather has zero give to it.

The boot offers decent vertical space with a toebox height of 26.3 mm. It felt adequate despite being 2 mm lower than average.

Designed for very moderate hikes and casual use, the Newton Ridge Plus II WP lacks the technical stability elements of the more advanced outdoor boots.

But given its fairly simple construction, this Columbia boot offers decent lateral support for moderate terrain and lighter backpacks.

The boot's firm platform and thick leather upper work together to generate some solid twist-proofing in the midfoot.

In our manual test, we rated the Newton Ridge's torsional rigidty with a high score of 4 (5 being the stiffest). This translates to a pretty supportive and confidence-inspiring underfoot experience on the trail.  

On the flip side, we wouldn't recommend this Columbia boot to hikers who:

• Comfortable step-in feel
• carry heavy backpacks (30+ kg) on challenging/uneven terrain

That's because the ankle support is very minimal in the Newton Ridge Plus II WP.

Its entire rearfoot (both the heel counter and the ankle collar) are too pliable to provide any solid support in extreme situations. We could eaisly push and squeeze the boot's heel couner in our manual test which resulted in a below-average stiffness score of 3.

It feels like the boot's extended collar is only there to protect the ankle from scrapes and scratches but nothing more than that. It is a casual/entry-level hiking boot after all.

Gladly, the Midsole softness in cold II WP has a generously wide platform to keep the ride stable.

Measuring the widest part of its midsole in the forefoot, our claiper recorded 115.9 mm which is notably wider than the average and is even on par with the chunky Hoka Anacapa 2 Mid GTX.

The heel of the Newton Ridge turned out to be equally wide with 88.5 mm in the widest area. It gave us a pretty solid footing without feeling too platformy.

Despite its leather upper and firm platform, the Newton Ridge bends much easier than a typical hiking boot.

To put a number on it, we used a shoe flexing tester to measure the amount of force it takes to bend the boot to a 30-degree angle. The machine returned 20.7N which is notably less than it takes on average.

This is yet another confirmation that this Columbia silhouette is more oriented towards comfort and recreation rather than long-distance performance.

Devoid of bulk and unnecessary features, the Newton Ridge Plus II WP happens to be lighter than average by 2.5 oz.

Weighing the boot in a men's US size 9, our scale showed a comparatively low reading of 16.5 oz (468g) but not as low as stated by the brand - 15.9 oz (452g).

On the hike, however, it felt very easy and non-taxing on the legs. Even lighter than its static weight suggests.

Even though the Newton Ridge is lined with Omni-Tech (Columbia's proprietary waterproofing), it's not equally effective throughout the boot.

During our wear tests, we couldn't help but notice that the tongue kept holding on to moisture instead of pushing it away! So when we took it to the lab for in-depth breathablity tests, all the puzzle pieces fell into place.

We noticed a streak of smoke passing through the seam at the base of the tongue which never happens in 100% waterproof hiking boots.

oz / 493g.

Looks like we have some bad news in the waterproofing department as the Newton Ridge is only capable of handing shallow puddles, minor drizzles, and occasional splashes.

It's better to avoid major water exposure if you want to keep your feet nice and dry in this Columbia boot.

The most high-wear areas of the boot are covered in PU leather. Even though it's not a top-grade type of leather, it proved to be more resistant to sharp bushes and rocks than textile or mesh.

In our abrasive durability test, we applied a Dremel with a sandpaper tip to the top of the boot's toebox at 5K RPM speed. After 12 seconds of drilling, the material showed very minor damage - the tool burned through the topmost PU layer without affecting the boot's integrity. Because of that we gave the Newton Ridge a high score for toebox durability - 4 out of 5!   

On the downside, this type of leather is prone to discoloration and creases which makes it less aesthetically pleasing with time.

The durability of inner lining is just as important as the exterior resilience if you want to experience a comfortable step-in feel for as long as possible. Because once that lining is torn, hot spots and blisters are just around the corner.

Unfortunately, we saw some significant wear and tear after applying our Dremel to the inner side of the Newton Ridge's collar for only 4 seconds. Assessing the damage, we couldn't rate the boot's heel padding durability with a below-average score of 3. Not much life expectancy here.

The rubber blend of this Columbia boot turned out to be slightly softer than average with a durometer readig of 84.0 HC.

Softer rubbers tend to feel tackier on wet rocks and boulders but on the fip side, they are more prone to wearing off (as our next test confirms).

Considering the lower price point of the Midsole softness in cold II WP, we kept our expectations low in the durability department.

That's why we weren't surprised to see how effortlessly the sandpaper bit into the boot's outsole rubber leaving a deeper-than-average dent of 1.3 mm.

It's good to see that the boot packs a very thick layer of rubber (3.7 mm) to extend its shelf life.

However, we would recommend staying away from concrete roads and rock-heavy trails if you want to get as much use out of this Columbia boot as possible.

The Newton Ridge features Columbia's proprietary Omni-Grip outsole with rather deep 4.7 mm lugs, based on our caliper measurements.

The boot's tread pattern is claimed to adapt to varied surfaces and we found it to be mostly true. It kept us pretty confident on moss-covered logs, loose rocks, and creek beds. However, its treading is not ideal for extra muddy terrain because it doesn't shed the dirt so easily. We also lacked some braking power on steep descents.

The Newton Ridge Plus II WP is a budget-friendly boot from Columbia that offers excellent value for money. It is an ideal option for recreational hikers who don't need all the newest bells and whistles of technical hiking boots.

Owners of this shoe, how does this shoe fit.

The Newton Ridge doesn't have much padding around the collar but it packs a generous amount of foam in its tongue. Our caliper recorded an above-average tongue thickness of 14.7 mm!

The boot has a fully-gusseted tongue which contributes to waterproofing and prevents small debris from getting inside the boot.

A fabric finger loop is placed at the back to help with the on-and-off. However, it feels a little too frail.

The insole of the Newton Ridge is easily removable in case you want to swap it for a custom orthotic.